ABB CIP Safety™ functions module
FSCS-21 is an easy-to-use, cost-efficient and compact safety functions module for connecting drives seamlessly to a safety PLC. This is enabled through the EtherNet/IP™ communication protocol.
Common Industrial Protocol (CIP Safety) over EtherNet/IP enables a single-cable solution for safety and non-safety control. The module is easy to install and configure and is suitable for ensuring the safety of equipment that reduces the risk of accidents for people working with machinery such as conveyors, and etc.
ABB all-compatible drives; CIP Safety™ functions module, FSCS-21
KEY FEATURES:
- EtherNet/IP and CIP Safety over EtherNet/IP. Built-in STO and SS1-t control
- For demanding safety applications. Safety certifications: TÜV Safety Integrity Level 3, (SIL 3)/Performance Level e (PLe) certified
- Supports multiple drive types. Common tools and interface for ACS380, ACS580, and ACS880 drives.
- Single-cable solution. Safety communications and drive control can be achieved using a single Ethernet cable.
- Ready-made safety functions. No need for separate safety configuration in the drive.
- Other advanced EtherNet/IP features. Ring topology – Device Level Ring (DLR)
- Engineering tools to support PLC integration. ABB can provide ready-made add-on instructions for safety and non-safety data exchange.
A similar PROFIsafe option is available for the ACS380, ACS580 and ACS880 variable frequency drives. The ACS880 can provide a variety of other Safety functions, including the following:
- Safe stop 1 (SS1)
- Safe stop emergency (SSE)
- Safe brake control (SBC)
- Safely-limited speed (SLS)
- Safe maximum speed (SMS)
- Prevention of unexpected startup (POUS)
Additional safety functions inside only the FSO-21:
- Safe direction (SDI), requires the pulse encoder interface module FSE-31
- Safe speed monitor (SSM)
The Belden® VFD Cable Solution
THE BELDEN® VFD CABLE SOLUTION
Only Belden’s series of VFD Cable in gauge sizes from 16 to 4/0 provide the robust construction required to deliver superior electrical performance and reliability, even in the most demanding industrial environments. Variable frequency AC motor drives generate
significant electrical noise that can create issues with associated or near by equipment, affect operational reliability, and lead to system failures or downtime. Typical cabling solutions for this application have been unshielded tray cables, single-conductor lead wire installed in conduit or shielded tray. These solutions suffer from complex, costly installation and potential noise and reliability problems. Belden VFD Cables were designed and engineered to overcome these challenges.
VFD CABLE FEATURES
- Thicker, industrial-grade XLPE insulations provide low capacitance for extended motor life, reduced likelihood of corona discharge, reduced magnitude of standing waves, increased efficiency of power transfer
- Robust ground and shielding system to minimize radiated and conducted noise that can disrupt plant control and instrumentation systems
- Reliably carry power from AC drive systems to AC motors
- Effectively handle the overall high power levels of pulse-width modulated (PWM) signals
- Reliably handle high voltage spikes – eliminating potential damage to the cable, motors, bearings, drives and related equipment – potentially extending their life
- Industrial-grade PVC jackets provide sunlight and oil-resistance; Haloarrest jackets are halogen-free and provide sunlight-resistance in LSZH versions
- Impervious to adverse or harsh environments
- ER rating allows for the elimination of conduit for easier and less expensive installations
- Effectively eliminate downtime due to cable failure
Eaton Power Defense MCCB
POWER DEFENSE MOLDED CASE CIRCUIT BREAKERS BY EATON
The Power Defense molded case circuit breaker portfolio is globally rated in a small footprint for easy adaptability no matter the application or project requirement. This circuit breaker has communicating electronic trip units and the ability to generate the data to help you optimize your facilities’ performance, and to help keep your employees, customers and end-users safe by reducing the risk of arc flash events. The Power Defense MCCBs feature the Power XpertT Release (PXR) electronic trip units, offering premium protection and communication features allowing you to use fewer components and a simplified design while keeping your system connected, your equipment and employees protected, and your customers informed. The PXR trip unit family has models that will cover all of your needs, including fully programmable models that enable ultimate customization and flexibility, as well as value models that offer all of the benefits of electronic trip units, with simple setup and coordination.
ADVANCED TECHNOLOGY AND FEATURES
- Breaker health
- Zone selective interlocking (ZSI)
- Arcflash Reduction Maintenance SystemE (ARMS)
- Enhanced ground fault protection
- Versatile communications options
- Cause of trip LEDs
- Programmable relays
- Power Xpert Protection Manager (PXPM) software
- Metering capability
- LCD display with programmable settings
Iboco Hagar Brand Duct
IBOCO HAGAR BRAND DUCT, NORTH AMERICAN BASE (NAB)
Iboco has teamed up with Hagar Brand to produce a wire duct that reflects the mounting hole configuration of all “North American” branded wire duct. The NAB standard finger PVC wiring duct is 2-meters in length, and includes a lid with a protective film that is easily removable after lid installation. The lid is a flush cover that snaps securely over the fingers, ensuring a tight fit with minimal effort.
If you are using Panduit, Tyton or T&B this will be a perfect match for you.
FEATURES
- Mounting hole configuration reflective of North American standards which allow for immediate mounting to the back panel of enclosure specified mounting holes
- Available in 2 different types: Standard finger PVC and Narrow finger/high density {for use with high-density terminal blocks}
- Lid is included contains a protective, removable film that can be removed after installation, eliminating unwanted scratches and smudges
- Lid is a flush cover that snaps securly over the fingers ensuring a tight fit w minimal effort
- Flexible, double scoreline for fast & easy modification. No cutter needed for first scoreline. Second scoreline easily removed with Triton side wall cutter
- Fingers ensure tight cover fit in vertical positions
- Heavy-duty shipping carton guarantees “damage free” product
Patlite LR
PATLITE LR SERIES: MODULAR LED SIGNAL TOWER
Patlite’s LR series is a next generation signal tower line featuring cutting-edge technology, modular segments for field configuration, and a wide-array of options to fit the most challenging applications.
The LR Series is available in sizes of 40, 50, 60 and 70mm in diameter, and is a stackable Signal Tower, allowing the user to recombine and re-stack.
FEATURES
- Uniform 360° Light-Emitting Design
- Modular System Design
- Reorganizing modules is effortless
- Smooth Surface makes for easy clean and water run off
- IP65 / NEMA Type 4X, 13
- Upgraded Material to Polycarbonate Resin
- Buzzer module produces more efficient sounds, up to 90dB, at 1 meter
ABB ACS580 Drive
ABB ACS580 MACHINERY DRIVE
KEY FEATURES
- 0.75 – 350 HP at 480 VAC
- 208 – 240 VAC 3-phase
380 – 500 VAC 3-phase
525 – 600 VAC 3-phase - Frequency: 50/60 Hz ∓10%
- Enclosure Type: UL type 1 (IP21) & UL type 12 (IP55)
- Interface: Local or remote mounted, LCD display and keypad. Wireless Bluetooth keypad (optional)
- Communication options: Profibus DP, CANopen, DeviceNet, Ethernet IP, Modbus TCP, EtherCat, EtherPOWERLINK, ControlNet
Icotek: Smart Cable Management
ICOTEK: SMART CABLE MANAGEMENT
Icotek has been successfully developing innovative systems for cable entry and EMC cable shielding for over 15 years. Their patented cable entry systems are used in a variety of industries and application areas. Their products are used in machine tool, railroad, solar, packing machines, automation and robotics. The Icotek product range is complemented by innovative solutions for EMC cable shielding. They ensure the safe operation of machinery and equipment by reliably and efficiently reducing high frequency interferences at the cable shield.
KEY PRODUCT LINES
- Cable entry Frames for Cables with Connectors (Grommet Based)
- Cord Grips / Cable Glands for cables with Connectors
- Cable Entry Plates for cables without Connectors (Membrane Based)
- Brush Cable Pass-Through
- Strain Relief & Cable Management
- EMC Cable Shield Clamps
- ATEX Cable Entry Systems
- Control Panel & Enclosure Accessories
Quick Quote
Request A Free Quote
Fill out our form to receive a free quote on the products you need. Our dedicated staff is ready to assist you with your project.
Have A Complex Custom Project That Requires Engineering Expertise? We Can Help.
Frontier Electric is more than a product distributor; we are a team of informed and dedicated personnel willing to help you solve your unique challenges. It is our goal to help you work smarter and build better.